SES Normal Analyses

  1.0 Introduction and Ambient Modeling

Available in days

days after you enroll

• 1.1 Overview of Normal Analyses (9:29) Start
• 1.2 Documentation Updates (4:02) Start
• 1.3 Form 1 and Ambient Modeling (7:59) Start

  2.0 Segment Updates for Normal (Form 3, 5, 11)

Available in days

days after you enroll

• 2.1 Tunnel Input for Normal (11:13) Start
• 2.2 Station Input for Normal (6:05) Start
• 2.3 Vent Input for Normal (7:28) Start
• 2.4 Environmental Control Zones (8:18) Start

  3.0 Train Data for Normal (Form 8, 9, and 10)

Available in days

days after you enroll

• 3.1 Train Routing for Forward Movement (Form 8) (14:40) Start
• 3.2 Train Routing for Reverse Movement (Form 8) (5:28) Start
• 3.3 Train Modeling and Physical Properties (7:04) Start
• 3.4 Train HVAC and Auxiliary Systems (Form 9C) (6:42) Start
• 3.5 Train Resistor Grids (Form 9D) (5:38) Start
• 3.6 Train Propulsion Motor (5:59) Start
• 3.7 Train Motor Control and Limits (Form 9H, 9J) (6:56) Start

  4.0 Simulations for Initial Values

Available in days

days after you enroll

• 4.1 Initial Train Resistor Grid Temperatures (9:39) Start
• 4.2 Wall Temperatures with Staggered Simulations (10:51) Start
• 4.3 Wall Temperatures - Simulations and Post Processing (9:49) Start

  5.0 Rush-Hour Simulations

Available in days

days after you enroll

• 5.1 Output and Offset Simulations (14:58) Start
• 5.2 Temperatures Along Stationing for Tunnels (13:51) Start
• 5.3 Volume Average Temperatures for Groups of Segments (5:31) Start
• 5.4 Station Outdoor Air and Air Velocities (5:42) Start
• 5.5 Sensitivity and Modified Simulations (9:45) Start
• 5.6 Wayside Pressures (10:08) Start